10 Tips For MiniMed<sup>&reg;</sup> Insulin Pump Care

Tuesday, January 10, 2017 - 11:36


 

In time, your MiniMed® insulin pump will become your side-kick. It will go everywhere with you and will be by your side. Since it will go along with you for so many life adventures, why not take a few extra minutes to keep your side - kick in tip-top shape?

1. Clean Your Pump with a Mild Detergent

When it’s time to clean your pump, wash your hands and use a cloth mixed with a mild detergent, such as dishwashing detergent, and water, to wipe your pump clean. You can use a clean, dry cloth and an alcohol wipe to disinfect your pump. There isn’t a set frequency of how often cleaning a pump is recommended, but it’s a good practice. 
Do not place your pump under running water or submerge it into any liquid. (Even though the MiniMed® 640G system^ is rated waterproof at the time of manufacture, it’s best to avoid submerging it during cleaning).  Also avoid cleaning it with household agents such as all-purpose cleaner, glass cleaner, hand sanitiser, or nail polish remover.

2. Make Sure Your Hands Are Clean

Avoid exposure to sunscreens, lotions, insect repellents, household and organic cleaning agents. So if you’re spending the day cleaning or have just put lotion on, be sure to wash and dry your hands before handling your pump.

3. Open and Close Your Battery Cap with a Coin or Belt Clip

Did you know? On the MiniMed®640G system, you can use the bottom of your belt clip to open your battery cap. Just detach the belt clip and use it to open and/or close your battery cap. It’s a dual-purpose tool!
For MiniMed® Paradigm platform pumps, use a thick coin, such as a 10 or 20 cent piece, to open and/or close your battery cap. Tighten until the slot is horizontal to prevent it from overtightening. Keep a coin in places where you might change your battery most frequently, like in a kitchen drawer or your diabetes supply cabinet.
If you lose or misplace your battery cap you can always pick up a few replacements from our online store by clicking below!
MiniMed®640G Battery Caps - Click here
Veo Paradigm model pumps and earlier – Click here

4. Place Your Pump in a Case

Cases can help provide a cushion against bumps during your daily activities, and come in a variety of different materials and colours to suit your style.You could even make these accessories part of your signature style! Here are a few of our favourites:

 

  • Silicone skins: low-profile skins that wrap around a belt clip, cosmetically enhance, and help resist scratching. Find them here
  • Sports cases or SPI-belts: heavy-duty protection from water and soil-resistant materials (great for any of you adventure-seekers). Get yours here
  • Pouches: act as a comfortable layer between your pump and skin to clip on to your waistband or pocket. Find a pouch for you here

 

 

5. Add a Screen Protector

Just like that screen protector that you might have on your mobile phone, they are also available for your pump! A screen protector is a simple way to add a buffer from day-to-day wear and tear that could impact your screen. For example, if you keep your pump in your pocket with your keys or wear it on your hip during outdoor adventures.
In packs of three you can get your own screen protectors on our eShop today.
MiniMed®640G Screen Protector – Click here
Paradigm Veo or earlier – Click here 

6. Wear Your Buttons Away From Your Body

 

  • If you wear your pump in a place where it touches your skin, make sure your pump buttons face away from your body to reduce moisture exposure. This is especially important for direct skin contact (like wearing a pump in a bra.) Here are a few ways you can wear your pump:
  • Clip it to your waistband or beltClip it to your waistband or belt – Clips available on the eShop – Click here
  • Place the pump (with or without the clip) into the pocket of your pants
  • Keep it in your shirt pocket
  • Use the leg or thigh pouch to wear it around your thigh or leg – Pouches available on eShop click here
  • Use a bra pouch to attach it to your bra – For bra pouches Click here

 

7. Exercise with Your Pump in a Case or on Your Belt

Working up a sweat feels good and helps cool down your body, but it can expose your pump to moisture without you even realising it. Keep your pump dry while exercising and on hot days by wearing it in a case made from water-resistant materials, such as our sports or nylon case, and/or on your belt clip. If you decide to disconnect your pump while working out, make sure it’s put in a safe place.

8. Protect Your Pump Around Water and In the Heat

This tip varies depending on what type of insulin pump you have.

The MiniMed®640G system is waterproof. At the time of manufacture and when the reservoir and tubing are properly inserted, the pump is waterproof in up to 3.6 meters of water for 24 hours at a time. The Guardian Link transmitter is waterproof in up to 2.4 meters of water for up to 30 minutes. We recommend that you still take care of it and don’t go swimming with it, but the pump will maintain waterproofing if this can’t be avoided.

 

 

 

 

The Paradigm platform, MiniMed® Veo and X22 systems are rated water-resistant but not water-proof, so be sure to disconnect from your pump when participating in water activities, showering, or using the sauna or steam room.
If you’re going to spend all day at the beach, pool, or waterpark, consider staying connected to your pump until entering the water or “splash zone,” and take breaks from the water when you need to reconnect. Talk with your family and friends to eliminate the chance of being pushed into the water while wearing the pump. If you notice moisture on your pump, dry it off with a clean dry cloth. You can verify your pump is working properly by selecting Self-test from the pump’s Utilities Menu. If your hands are wet, be sure to dry them off before handling your pump.
While you’re disconnected, test your blood glucose (BG) often, and be prepared with fast-acting insulin and glucose. Be sure to talk with your healthcare team to establish a plan if you’re going to regularly disconnect for longer than one hour.
With any insulin pump, keep in mind that Medtronic insulin pumps are designed to withstand temperatures up to 40 degrees celsius. The temperature threshold of your insulin will vary by brand, type, and concentrations, so best to talk with your insulin manufacturer for that information.

9. Minimise Scanning Technology Exposure

Be careful when wearing your pump in new environments. If you’re going to the doctor’s office for  X-rays, CT scans, PET scans, and MRIs, be sure to disconnect from your pump prior to the body scan.
While going through airport security, be sure to remove both your pump and sensor if you’re going through the body scanner, but do not send the devices through the x-ray machine. As an alternative, you can go through an airport metal detector, or ask for a pat-down screening process.

10. Store in a Dry Cool Place

If you disconnect from your pump, keep your pump, BG meter, and other diabetes supplies in a safe place, unexposed to direct heat and away from water. If your supplies must be outdoors, place them in a bag, or under a few light colored towels, in a dry shady area. Since different items have different storage requirements, keeping them dry and close to room temperature will ensure that the pump and insulin will perform as expected when you reconnect.

IMPORTANT SAFETY INFORMATION

– Medtronic Diabetes insulin infusion pumps, continuous glucose monitoring systems and associated components are limited to sale by or on the order of a physician and should only be used under the direction of a healthcare professional familiar with the risks associated with the use of these systems.
– Successful operation of the insulin infusion pumps and/or continuous glucose monitoring systems requires adequate vision and hearing to recognise alerts and alarms.

Medtronic Diabetes Insulin Infusion Pumps

– Insulin pump therapy is not recommended for individuals who are unable or unwilling to perform a minimum of four blood glucose tests per day.
– Insulin pumps use rapid-acting insulin. If your insulin delivery is interrupted for any reason, you must be prepared to replace the missed insulin immediately.
 

3 ways to get started

To have a Medtronic representative contact you
Give us a call 1800 777 808
Talk to a Local Trainer